Architectural & Industrial Railing

SAFTRON is an advanced vinyl safety rail system designed to meet today's most demanding commercial and residential requirements. It combines nearly all desirable features into one beautiful - yet extremely tough, economical railing system.

In the most abusive environments, SAFTRON railings excel by emerging almost completely free of deterioration. They are impervious to rust, corrosion, peeling or flaking. They never need to be scraped, sand-blasted or painted. The hard vinyl material that SAFTRON railing is made from continues to provide an attractive, low maintenance surface year after year.

SAFTRON Safety Railings have been thoroughly tested and exceed all building code requirements. Available in numerous distinctive styles and in virtually any color, there is undoubtedly a SAFTRON railing to surpass your next project requirements.

 
SAFTRON RAILING ASSEMBLIES are available in standard lengths of 4' and include pickets on 4-11/16" centers. The standard 4' unit includes a pre-installed stanchion. Standard railing assemblies are 42" high and mounted to stanchions which are 42" high above finished deck. Stair rail units provide standard 34" height and accommodate any stairway pitch.
 
SPLICE TUBES are internal components used to assure rigid splices in top and bottom rails and as end place connectors.
  
TEES, CROSS AND END FITTINGS are matched to rail and stanchion diameters for smooth joint transitions. (Rectangle and other styles are similar. Detailed specifications available upon request.)
 
TOP AND BOTTOM RAILS are composed of two laminated tubes with the inner tube extending as required to receive tee, cross or end fittings. (Rectangular and other styles are similar. Detailed specifications available upon request.)
 
END PLATES are required where railings mount directly to a wall or other vertical surface. Diameter of shaft matches splice tube 1.0.
 
Saftron Safety Railings and Industrial Railings conform to OSHA regulations and meet or exceed all building code requirements.
 
Typical Physical Properties
Flame Spread
Class A
ASTM E-84
Specific Gravity
1.47
ASTM D-792
Comprehensive Strength (PSI)
8,100
ASTM D-695
Flexural Strength (PSI)
12,100
ASTM D-790
Flexural Modulus (PSI)
400,000
ASTM D-790
Tensile Strength (PSI)
6,500
ASTM D-638
Tensile Modulus (PSI)
390,000
ASTM D-638
Izod Impact ft. lbs./in., notched
15
ASTM D-256
Heat Deflection Temp. @ 264 PSI
162° F
ASTM D-648


 
 
 
       
 
Home  |  Products  |   Literature  |   Warranty  |   Where to Buy  |  Contact Us
Copyright 2006 www.saftron.com - All rights reserved.